The Antalis Academy Digital Wallcoverings Applications Workshop – August

Who's the course for?

The workshop is aimed at companies who have Large Format Inkjet technology to print Digital Wallcoverings and are looking to get a complete overview of all aspects of application as well as practical hints and tips from an expert in this field.

Course Syllabus

  • Introduction to products available  and techniques required for application. Paste to wall, paste to paper, pre-pasted, overlap and splice, butt joint, pros and cons etc. Suitability of product for application. Basic advice on sticking to systems regarding overlaps and bleed when printing. Packaging of product, damage before it arrives at site. Importance of site surveys if possible.
  • Wall preparation, removal of old wallpaper, filling, sanding, smoothness of any joints in wall, priming and sealing, lining papers, importance of finished surface, ‘blimming’ rough spots. Application over existing wallpaper.
  • Setting out, starting points, obstacles and obstructions – plugs, sockets, alarms, light switches, radiators etc.
  • Environmental conditions – extreme heat and sun, drying too quickly, shrinkage in joints. Brittleness in vinyls when too cold.
  • Preparation and conditioning of adhesive, application, paste usage in relation to surface, pasting external edges.
  • Overlaps, laser levels and importance of straight / plumb edges across long runs and round obstacles such as windows to ensure pattern / image matching.
  • Splicing onto different surfaces and damage to wall, knives, cutting strips, reverse cutters.
  • Positioning – splicing near external corners, cutting into internal corners. Use of corner protectors.
  • Leads into tools – applicators, blades, shears, basic kit etc.
  • Section on stairwells and long drop image matching, windows, doors etc and use of different media.
  • Good housekeeping and practices, clean water, clothes, undamaged tools. Damage caused by excess adhesive. Care of tools. Touch up and repairing damage, scratches and tears, pencils, re-applying adhesive etc.
  • Suitable surfaces, windows, walls, floors etc. Preparation of surfaces. Environmental conditions.
  • Dry mounting and wet mounting. Sealing walls for wet mounting.
  • Tools, application fluids, cleaners etc.
  • Cutting techniques for sharp corners, window seals etc.
  • Problems, removal of old vinyl and glue, bomb proof vinyl, fogging, shrinking back etc
  • Repairs, heat guns, touching up damage etc.

Location & Booking

The Antalis Academy Coalville, Leicestershire.
14th August 2019 | 10:00am - 4:00pm

To book yourself onto the course, fill out the form below.

Tutor Profile

Tom Earthrowl

Tom Earthrowl has over 20 years’ experience in the Print Industry. He has worked extensively with the installation of wallpapers and large format graphics in the commercial market. With many hours of hands on experience gained from projects large and small, he has the knowledge to educate you on all aspects of digital wallcovering application from preparation and positioning to getting the best from your materials and tools.

Unfortunately, this course has already past.